Talc filler masterbatch for injection molding and extrusion molding Product Description: Talc filler masterbatch contains talcum, carrier resin and some additives. It’s suitable for film blowing
Manufacturing customized talc filler masterbatch for injection molding and extrusion molding, we are well-known among those famous such suppliers in China, welcome to purchase talc filler masterbatch for injection molding and extrusion molding from us.
Talc filler masterbatch contains talcum, carrier resin and some additives. It’s suitable for film blowing, extrusion molding, injection molding, etc. This product has dispersion very fine, free of agglomeration and bring for the end product more improve printability, smoothness, hardness, stiffness, antiblock, etc. It is mainly used for PP, PE plastic sheet and plastic injection and EPE foaming.
Talc filler masterbatch for injection molding and EPE foaming
MFI ( g/10min )
Density ( g/cm3)
Injection molding, EPE foaming, etc.
TT , LC etc.
Less than 7 days
25Kg per bag. compound woven bags with plastic inner bag, or customized
Keep the products in a dry, ventilated place, Note to avoid moisture, insolation, rain and breakage in transportation.
1.The oil absorption of the powder is low, good fluidity and dispersion, good surface finishes of the products.
2.Light Specific gravity, high transparent and brightness, the refractive index close to the PP、PE
3.The high adding ratio is more than 50%.
4.Good dispersion, do not separate out.
5.Improve the impact resistance, thermal conductivity and abrasive resistance of the product. Reduce the heat shrinkable property, improve the strength and toughness of the product.
6.Improve the strength and geometric stability of the product, avoid or reduce the shrinkage of injection molding
Used for blow film/extrusion, such as shopping bags, hollow sheet.
Used for blow film/blow molding/extrusion, such as
EPE foaming and also customized
Established in 2000, Zibo Holy Masterbatch Co.,Ltd is one of the leading plastic masterbatch manufacturer in China, located in Eastern Chemical Zone of Zibo, Shandong, China. The premises cover production capacity of 50,000 tons annually, 11,000 square meters, 10 high intelligent and automatic production lines. The main products include the filler masterbatch, desiccant masterbatch and color masterbatch.
If you need more information, please contact us directly.