CaCO3 Plastic Filler Masterbatch for Film Blowing
Basic Info:
Model NO.: CaCO3 Plastic Filler Masterbatch for Film Blowing
Usage:General Plastics, Engineering Plastics, Specialty Plastics
Plastic Properties After Heated: Thermosetting Plastic
Plastic Forming Method: Extrusion
Color: White
Application: Film Blowing
Carrier: LLDPE
Filler Content: 80% CaCO3
Adding Ratio: 10-40%
Mfi (G/10min at 190C): 2
Processing Temperature:120-220 C
Sample:Free
Specification:Small Granule
Calcium plastic filler masterbatch for blowing film is specially designed to replace recycled hdpe, ldpe, lldpe, pp. It works by dispersion technologies to modified powders to keep the same performance with polyethylene.
This leads to the following benefits:
-reduced the overall material cost.
-up to 60% addition rate on pe matrial.
-no any dark spot on products surface.
-low water content by itself.
Physical properties:Index | Value | Unit |
Inorganic Nano Powder | CaCO3 | % |
Carrier | LLDPE | |
Density | 1.6( +/- 0.05) | g/cm3 |
Melt Index | <2.00 | g/10min (190C/2.16Kg) |
Water Content | <0.1 | % |
Powder Size | 12 | Micron |
Granule Size | 5(+/-0.5) | mm |
Processing Temperature | 120-220 | C |
FAQ
1:Are you a factory or trading company?
A: We are a factory.
2: What is the shipping terms?
A: FOB, EXW, CFR, CIF,according to your request.
3: What is your lead time?
A: 2-3 working days for sample, 7-15 days for bulk orders.
4: Can you provide free sample of Masterbatch?
A: Of course, Please feel relieved to tell us your specific require and the customized sample will be ready for you.