Home > Knowledge > Content

Filler Masterbatch for Casting Film

Nov 19, 2016

Filler Masterbatch for Casting Film

Basic Info:

  • Model NO.: Filler Masterbatch for Casting Film

  • Usage: General Plastics, Engineering Plastics, Specialty Plastics

  • Plastic Forming Method: Extrusion

  • Filler: Calcium Carbonate

  • Filler Mesh: 1250

  • MFI: 1-15

  • Moisture: 0.01

  • Application: Blow Film/Casting Film

  • Material: Powder and Plastic

  • Plastic Properties After Heated: Thermoplastic Plastics

  • Color: White

  • Filler Content: 80%

  • Carrier Resin: PE

  • Density (g/cm3): 1.6-1.7

  • Adding Ratio: 5-50%

Product advantages:
1. Using the nano modified caco3 powder as the filler.
2. Keep the film's physical properties of surface gloss and toughness, so will not affect the printing on the film.
3. Good dispersion, so that the film without crystal spots and not easy to be broken.
4. Good pull, with high adding ratio more than 50%.
5.Non- corrosivity, no damage to the screw and die-head
6. Increase the extrusion output as per unit time,  improve the production efficiency and reduce the total production cost.

Product Data:

NameCaCO3 Filler masterbatch
Surface ColorWhite
Filler Mesh No.1250
Filler Content85%
Carrier ResinPP/PE
MFI (g/10min at 190ºC)1-15
Density (g/cm3)1.6-1.7
Adding ratio5-50%
ApplicationFilm blowing, Injection molding, Blister etc.
Packing25KG compound woven bags, or customized
StorageKeep the products in a dry, ventilated place, Note to avoid moisture, isolation, rain and breakage in transportation.