Good Price Plastic Filler Master Batch for PE Blow
Basic Info:
Model NO.: Plastic Filler Master Batch for PE Blow
Usage: General Plastics, Engineering Plastics, Specialty Plastics
Plastic Forming Method: Extrusion
Name: Good Price Plastic Filler Master Batch for PE Blow
Carrier: PE
Mfi: 1-15
Moisture: <=0.15%
Material: Powder and Plastic
Plastic Properties After Heated: Thermoplastic Plastics
Color: White
Filler: BaSO4
Filler Content: 80%-85%
Density: 2.0-2.4
Adding Ratio: 2-40
Transport Package: 25kg/Bag
Origin: China
Plastic Filler Master Batch for PE Blow advantages:
1. High transparent and brightness, the refractive index close to the PP,PE
2. The high adding ratio is more than 50%.
3. Good dispersion; donnot separate out.
4. Good heat sealing properties, high tensile strength
5.Improve the plastic products' mechanical properties, increase the intensity and stiffness.
6. IIncrease the extrusion output as per unit time, improve the production efficiency and reduce the total production cost.
Production Data:
| Name | Good price plastic filler master batch for pe blow |
| Surface Color | White Brightness |
| Filler | BaSO4 |
| Filler Content | ≤85% |
| Carrier Resin | PE |
| Diameter | 2.5mm~2.8mm |
| MFI (g/10min) | 1-15 |
| Density(g/cm3) | 2.0-2.4 |
| Resistance Temperature | 280°C=536°F |
| Melting Point | 110°C=230°F |
| Adding ratio | 2-40% |
| Application | Blown film, Injection molding, Blister etc. |
| Packing | 25KG compound woven bags, or customized |
| Storage | Keep the products in a dry, ventilated place, Note to avoid moisture, isolation, rain and breakage in transportation. |