High Quality CaCO3 Filler Masterbatch
Basic Info:
Material: Polyethylene/PE
Usage: General Plastics
Plastic Properties After Heated: Thermoplastic Plastics
Plastic Forming Method: Film Pressure
Color: White
Product Introduction:
The CaCO3 Filler Masterbatch is using high-quality Nano powder and other special ingredients as raw materials and processed by twin-screw extruder. It can significantly improve production efficiency, product whiteness and other physical and chemical index thus improve end-product quality.
CaCO3 Filler Masterbatch Features:
1. With wide application, equipment and processing adaptability, no need to change processing procedure of replace equipment.
2. Of good dispersion, high whiteness, strong tension and nice glossiness.
3. Improving the opening of finished product without dust separating out, making end-product smoothly touched.
4. Have no impact on printing, heat sealing or compound.
5. Non-toxic and non-irritating, uniform particle size, no influence on mechanical properties. Better than ordinary additives.
CaCO3 Filler Masterbatch Technical Data:
Particle Size | 2-3mm |
Mesh No. | 1500 |
Filler | Calcium Carbonate |
Carrier Resin | PP / PE |
Density(g/cm3) | 1.4-1.6 |
MFI(g/10min) | 1.8 |
Water content | less than 0.01% |
Melt Temperature | 130-160 |
Whiteness | 93 |
Packing | 25kgs/craft paper bag |
Storage | sealed, stored in dry place away from direct sunlight. Try to run out after opening package. |