Black masterbatch for plastic pipe
Plastic pipe is a tubular section, or hollow cylinder, made of plastic. It is usually, but not necessarily, of circular cross-section, used mainly to convey substances which can flow—liquids and gases (fluids), slurries, powders and masses of small solids. It can also be used for structural applications; hollow pipes are far stiffer per unit weight than solid members.
Plastic pipework is used for the conveyance of drinking water, waste water, chemicals, heating fluid and cooling fluids, foodstuffs, ultra-pure liquids, slurries, gases, compressed air and vacuum system applications.
Many materila can be uesd as pipe material, such as PP,PE,ABS,UPVC,CPVC,PB-1,PVDF,PE-RT ETC.
Polypropylene is suitable for use with foodstuffs, potable and ultra pure waters, as well as within the pharmaceutical and chemical industries.
Polyethylene has been successfully used for the safe conveyance of potable and waste water, hazardous waste, and compressed gases for many years. Two variants are HDPE (high-density polyethylene)and the more heat resistant PEX (cross-linked polyethylene).
PE has been used for pipes since the early 1950s. PE pipes are made by extrusion in a variety of sizes dimensions. PE is lightweight, flexible and easy to weld. Its smooth interior finish ensures good flow characteristics. Continuous development of the material has enhanced its performance, leading to rapidly increasing usage by major water and gas utility companies throughout the world.
Carbon black materbatch, contain carbon black, resin and additives, can be widely used in kinds of PE/PP pipes.
PRODUCT NAME: BLACK MASTERBATCH | |||
SUITABLE PRODUCT FOR: FILMS, EXTRUSION, INJECTION, THERMOFORMING, etc. | |||
SUGGESTED ADD RATIO: Recommend to add 2.0% - 8.0% | |||
OBSERVATION: The masterbatch dosage is according to the final product requirements. | |||
S/N | PROPERTIES | STANDARD | RANGE |
1 | CARRIER RESIN | / | PE/PP |
2 | BRAND | / | HOLY |
3 | ORIGIN | / | SHANDONG,CHINA |
4 | PELLET SHAPE & SIZE | / | 2.5mm-3mm Pellet |
5 | COLOR | / | BLACK |
6 | PIGMENT(CARBON BLACK) | CAS NO. | 1333-86-4 |
7 | POLYMER | CAS NO. | 9002-88-4 |
8 | ADDITIVE | CAS NO. | 110-30-5 |
9 | CARBON BLACK CONTENT | % | 5%-50% |
10 | FILLER CONTENT | % | 0-40% |
11 | COLOR INTENSITY | ASTM D 3265 | 95%-105% |
12 | MELTING POINT | ISO11357:1999 | 120℃-150℃ |
13 | MOISTURE CONTENT(105℃) | ASTM D 789 | ≤0.15% |
14 | MFI 190℃/21.6KGS | ASTM D 1238 | 2-20g/10min |
15 | DENSITY | ASTM D 792 | 1.2-1.5g/cm3 |
16 | CERTIFICATION | / | SGS |
17 | PACKAGE | / | 25kg per paper bag, or customized |
18 | PAYMENT TERMS | / | TT,LC,etc. |
19 | DELIVERY TIME | / | Less than 7 days |
20 | MOQ | / | 1 Tons |
21 | STORAGE | Keep the products in a dry, ventilated place, Note to avoid moisture and insolation, rain and breakage in transportation. |