Home > News > Content

Transparent Talc Filler Masterbatch

Sep 10, 2016

Product advantages:

1.The oil absorption of the powder  value is low,  with good fluidity and dispersion, so its the good surface finish of the products.
2. Light Specific grativity, high transparent and brightness, the refractive index close to the PP,PE
3. The high adding ratio is more than 50%.
4. Good dispersion, donnot separate out.
5. Good heat sealing properties, high tensile strength
6. Improve the impact resistance, thermal conductivity and abrasive resistance of the product. Reduce the heat shrinkable property,  improve the strength and toughness of the product.
7. Improve the strength and geometric stability of the product, avoid or reduce the shrinkage of injection molding


Product Data:

NameTalc filler masterbatch
Surface ColorWhite
FillerTalc
Filler Mesh No.1500
Filler ContentLess than 85%
Carrier ResinPE
MFI (g/10min)2-6
Density (g/cm3)1.6-1.7
Melt Temperature160
Mositure<=0.01
Adding ratio5-50%
ApplicationFilm blowing, Injection molding, Blister etc.
Packing25KG compound woven bags, or customized
StorageKeep the products in a dry, ventilated place, Note to avoid moisture, insolation, rain and breakage in transportation.
 
Product applications:
a. Blow Film ( shopping bags, casting film, multilayer film, etc.)
b. Blow Molding ( Medical & Cosmetic container, Lubricant & Paint container, etc)
c. Extrusion Molding ( Sheet, Pipe, Wire & Cable, etc.)
d.Injection Molding ( Automotive, Electronic, Construction, House wares, Furniture, Toys, etc.)
e. Fiber ( Carpet, Textiles, Upholstery, etc.

Previous: White Masterbatches
Next: PP color masterbatch for injection molding